XP-4-5019A
XP-4-5019A four post alignment lift
The XP-4-5019A is the four-post platform specified for alignment work: a 4,000 kg, 4,200 mm platform whose rolling jack lifts one end of the vehicle 350 mm for the wheel-free checks an alignment bay performs all day.
Request a quotationBrowse the range- Capacity 4,000 kg
- Platform 4,200 mm
- Rolling jack 350 mm
- Aligner pairing
Why alignment wants a platform
Alignment measures the car as it sits, so the lift's first job is to present the car level, on its wheels, at working height — which is a platform's natural state. Turntables under the front wheels let the steering move freely during measurement; slip plates at the rear let the suspension settle honestly; and the rolling jack raises an axle when the adjusters or a wheel-free check demand it. The XP-4-5019A's published set — 4,000 kg, 1,700 mm main lift, 350 mm jack lift — is that arrangement's specification.
The pairing discipline matters more than any single figure: aligner, platform, turntables and slip plates are one measuring system, bought as one package. The wheel alignment family in this catalogue is the other half of this page, and quote the two together, as one bay, rather than as two compatible-in-theory.
Platform figures that decide alignment work
Minimum height 200 mm sets which low cars can drive on; platform width 550 mm per runway sets the track range the runways land under; lifting time 50–60 seconds is the bay's rhythm, slower than a two-post and irrelevant to alignment throughput, which is governed by measurement and adjustment, not by the rise.
What the table does not show is levelness after installation, because that is an installer's figure, not a manufacturer's: the platform must be set level and stay level, and the installation conversation should name the levelling and fixing method for your floor. Ask it in the inquiry, alongside the aligner configuration.
XP-4-5019A specification
The XP-4-5019A's parameters are in the table below.
| Lifting capacity | 4,000 kg |
|---|---|
| Lifting height | Main 1,700 mm / jack 350 mm |
| Min height | 200 mm |
| Platform length | 4,200 mm |
| Platform width | 550 mm |
| Air pressure | 0.6–0.8 Mpa |
| Lifting time | 50–60 s |
| Motor power | 2.2 kW (380V / 220V) |
| Rated oil pressure | 24 Mpa |
| Weight | 1,200 kg |
Checks before an alignment-platform quote
- Aligner model chosen, with turntable and slip-plate positions settled against the platform.
- Floor levelness and the levelling method the installation will use.
- Track widths of your narrowest and widest regular cars against the 550 mm runways.
- Camera sight lines down both sides of the platform for the aligner configuration.
- Air supply for the locks and jack at the platform position.
Questions buyers ask about 4 post alignment lift
Does the platform include turntables?
Turntables and slip plates are part of the alignment package configuration rather than the lift's base specification — settle them in the same quotation as the aligner, so positions and recesses are agreed before anything ships.
Can this platform do ordinary repair work?
Yes — it is a full four-post lift, and workshops routinely mix alignment and general work on it. The alignment bay's discipline is scheduling: measurement wants the platform free and level, not shared mid-job.
Which aligners pair with it?
Any of the car aligner range, configured for the platform. The car alignment page works through the configurations; quote the pair together.
Send an inquiry
Ask for the unit matched to your work. Send the model code you are considering and the work it will do each week; ask for that model's specification sheet in return.
Request a quotation About the company