Products
All products: sixteen families of garage equipment
The complete range on one page: lifts, alignment, tyre service, body repair, air and diagnostics. Open a family card to reach its category and its models, and take each model's specification from its own page.
Request a quotationBrowse the range- 16 families
- 48 product pages
- Spec tables per model
- Guides and comparisons linked
The sixteen families
Families are ordered the way workshops buy: lifts, then the wheel-service lines, then body, air and diagnostics.
Generic illustration of a 3D wheel alignment check with targets fitted to a sedan on a lift
Wheel Alignment
3D camera aligners for cars (XP-A6–XP-A10) and trucks (XP-A11–XP-A14), specified by configuration and spec sheet.
See the range
Generic illustration of a clear-floor two-post vehicle lift with yellow swing arms
Two Post Lifts
The XP-2-40 family and heavier two-post lifts from 4,000 kg to the wide 5,500 kg XP-2-55C.
See the range
Generic illustration of a four-post lift with runways, approach ramps and a rolling jack
Four Post Lifts
Drive-on four-post platforms: the 5,000 kg XP-7650, the XP-7640 and the XP-4-5019A alignment lift.
See the range
Generic illustration of a full-rise double scissor lift raised to full height
Scissor Lifts
Full-rise, mid-rise and in-ground scissor platforms for repair, fast-service and flush-floor bays.
See the range
Generic illustration of a portable single-post lift raising one side of a small car
Single Post Lifts
The XP-1527 single-post lift: 2,700 kg of movable lifting for overflow and prep work.
See the range
Generic illustration of mobile column lifts raising a truck cab and chassis
Truck Lifts
Mobile column lifts at 5,500 and 8,500 kg per column, in mains and battery versions.
See the range
Generic illustration of a vehicle parking lift with one car stored above another
Parking Lifts
The XP-1127 parking system: stacked parking in a single slot; take its specification and siting from its own page.
See the range
Generic illustration of a swing-arm tire changer with a car wheel mounted on the turntable
Tire Changers
The XP-316 and XP-326 changer families, heavy-duty 28-inch models and a motorcycle changer.
See the range
Generic illustration of a heavy-duty truck tire changer holding a large truck wheel
Truck Tire Changers
Truck tyre changers from the XP-468 group to the heavy-duty XP-499A at 60 inches with extensions.
See the range
Generic illustration of a wheel balancer with its hood open and a car wheel mounted
Wheel Balancers
The XP-560 and XP-570 balancer families at ±1 g, plus the 70 kg XP-513 and the XP-500 lifter.
See the range
Generic illustration of a truck wheel balancer with a large wheel and a wheel lift beside it
Truck Wheel Balancers
Truck wheel balancers: XP-512D and XP-513D, lift-equipped XP-512 and XP-598, dual-mode XP-562.
See the range
Generic illustration of an auto body frame bench with a pulling tower and chain
Car Benches
The XP-601 and XP-600 car benches: 100 kN pulling for structural collision repair.
See the range
Generic illustration of the inside of a spray booth with a sedan under ceiling light panels
Generic illustration of an enclosed rotary screw air compressor cabinet with a vent grille
Air Compressors
Rotary screw packages, belt-driven piston machines and portable diesel compressors.
See the range
Generic illustration of an air-conditioning service machine with gauges and red and blue hoses
AC Service Machines
The X845 and X820 AC stations, the dual-gas X849 and the R1234yf X880.
See the range
Generic illustration of a chassis road simulator with shaker platforms under a sedan
Chassis Road Simulators
The XP-S4500 and XP-S4500TS road simulators: shake the wheel, locate the noise.
See the rangeCross-family buying table
Three questions recur across every family in this catalogue. Use the category pages to work through these questions, family by family; the pattern is:
| Question | What decides it | Where it is answered |
|---|---|---|
| Will it fit my building? | Ceiling height, floor and pit facts, overall dimensions | Each lift family's checks list |
| Will it fit my vehicles? | Capacity, platform or clamping envelope, rim and wheel ranges | Each model page's specification table |
| What will it cost to run? | Duty cycle, consumables, filter and database upkeep | The guides and blog articles per family |
| Where do I take a model's specification from? | Take each model's specification from its own page | Ask in writing for anything beyond the table |
Send an inquiry
Start with the fit facts of your own workshop. Give your ceiling height, floor space, door width and the heaviest vehicle you lift, and send those facts with the family you are asking about.
Request a quotation About the company