XP-7255TD
XP-7255TD two post lift
The XP-7255TD is a 5,500 kg two-post lift with a five-parameter specification. Its specification is five parameters, set out in the table below.
Request a quotationBrowse the range- Capacity 5,500 kg
- Lift height 1,894 mm
- Min height 106 mm
- Weight 1,020 kg
Buying a five-parameter model
The XP-7255TD is a heavy two-post lift at the top of the family's capacity range. Judge this model the way you judge any other in the range: on its table, and on the written confirmations you close before ordering.
The specification below is complete: five figures. Everything else a buyer normally compares — release system, post arrangement, width figures — ask for in writing for this exact model before ordering, through the inquiry route below.
The height figures need your ceiling
The overall height is published as three configuration-dependent figures: 5,206, 5,320 and 5,421 mm. That spread is tall by any workshop standard, and it means the ceiling question is not a formality for this model — it is the first question. Measure your clear height, state it in the inquiry, and have the configuration that will be supplied confirmed against it in writing.
The lifting side is unambiguous: 5,500 kg capacity, 1,894 mm maximum lifting height and a 106 mm minimum height that suits low cars. At 1,020 kg the machine itself is a substantial delivery, so access and offloading belong in the same conversation as the ceiling.
Where it sits against the catalogue family
The domestic two-post family reaches the same 5,500 kg capacity with the XP-2-55C: take its full parameter table from the 2 post lift page. The choice between that model and this one is a buyer's judgement call about the work each does in your shop, judged against the quoted configuration and price — and it should be made with both pages open.
The XP-7255TD is not the XP-2-55C. The two lifts share a capacity class and nothing else; this model's open items stay open until they are confirmed in writing for this exact model.
XP-7255TD specification
Five figures, complete — the table below.
| Lifting capacity | 5,500 kg |
|---|---|
| Max lifting height | 1,894 mm |
| Overall height | 5,206 / 5,320 / 5,421 mm (by configuration) |
| Min height | 106 mm |
| Weight | 1,020 kg |
For post width, pass width, release system and motor figures, ask by name in your inquiry and hold the order until they are confirmed in writing.
Confirmations to close before ordering this model
- Clear ceiling height against the three published overall heights, with the supplied configuration named.
- Release system, post arrangement and pass width, confirmed in writing for this model.
- Motor power and supply phase for the unit that will be shipped.
- Concrete and fixing requirements from the model's installation information.
- Delivery access and offloading for a 1,020 kg machine.
Questions buyers ask about xp-7255td two post lift
How do I check a model with a five-parameter table?
Because the model carries a five-parameter table. Work from the five parameters in the table below; everything else is a written confirmation to obtain before ordering, not a figure to borrow from another model.
Is the XP-7255TD the same as the XP-2-55C?
No. Both are 5,500 kg two-post lifts, but they are different models with different specifications — the XP-2-55C's height figures alone (1,900 mm lift, a much lower frame) show they are not the same machine. Compare the two pages directly.
Can I order it with the gaps unconfirmed?
You can, but you should not. The confirmation list above is short and specific; closing it in writing before money moves is the entire discipline of buying a five-parameter model well.
Send an inquiry
Ask for the unit matched to your work. Send the model code you are considering and the work it will do each week; ask for that model's specification sheet in return.
Request a quotation About the company