XP-7132
XP-7132 two post lift
The XP-7132 is the light end of the two-post idea: 3,200 kg capacity and a full 1,900 mm lifting height inside a 2,850 mm overall height — a combination aimed at workshops whose ceiling, not whose workload, is the constraint.
Request a quotationBrowse the range- Capacity 3,200 kg
- Lift height 1,900 mm
- Overall height 2,850 mm
- Min height 98 mm
The low-ceiling case for this model
Overall height is where two-post lifts fail in real buildings. The domestic family's frames stand around their own heights, gantry crossbars need clear air above the posts, and older workshops, basement premises and mezzanine floors simply do not have it. The XP-7132's published overall height of 2,850 mm is the reason this model exists: it keeps a genuine 1,900 mm lifting height — full standing work under the car — inside a frame that fits under ceilings the rest of the family cannot use.
The trade for that height is capacity: 3,200 kg is a car rating. It covers the car parc honestly, including larger cars, and it excludes vans and light trucks by design. The 98 mm minimum height is the other useful figure — low cars reach the arms without ramp gymnastics.
Confirming a short specification
Like the XP-7255TD, the XP-7132 carries a five-parameter specification — the table below. Everything else — post widths, release system, motor — is a written confirmation to obtain for this model before ordering. Work the short specification as a checklist, closed item by item in writing, the same way as any longer one.
The comparison that matters is against the XP-2-40 family on the 2 post lift page: those models carry 4,000 kg, in taller frames. If your ceiling clears them, buy on their figures. If it does not, the XP-7132 is the model that keeps two-post lifting possible at all — and that is a real and common workshop situation.
What to confirm, in writing
Three confirmations close this model's record. The release system and post arrangement, because they decide daily work and bay width. The motor and supply, because a low-ceiling building's power is as individual as its roof. And the fixing and concrete requirements, because older floors in older buildings are exactly where assumptions fail. All three belong in your inquiry as single questions about this exact model.
Weight is published — 650 kg — so delivery and handling can be planned from this page. For installation help, as for the confirmations, write through the inquiry with the building's facts attached.
XP-7132 specification
Five figures, complete — the table below.
| Lifting capacity | 3,200 kg |
|---|---|
| Max lifting height | 1,900 mm |
| Overall height | 2,850 mm |
| Min height | 98 mm |
| Weight | 650 kg |
Ask for the release system, widths and motor figures in writing with the quotation — name them in the inquiry so nothing is assumed.
Confirmations to close before ordering this model
- Your clear ceiling height against the 2,850 mm overall height, lights and door tracks included.
- Your vehicle weights against the 3,200 kg rating — cars only, named honestly.
- Release system, pass width and post arrangement, confirmed in writing for this model.
- Motor power and supply phase for the unit that will be shipped.
- Floor condition and fixing requirements in an older building.
Questions buyers ask about xp-7132 two post lift
Is 3,200 kg enough for modern cars?
For cars, including large and electric models at the heavy end of the car parc, it is a workable rating — but it is a ceiling, not a target. If any vehicle you lift regularly approaches it, the 4,000 kg family is the honest buy and the ceiling question has to be solved another way.
Why is the overall height so much lower than other two-post lifts?
Because that is the model's purpose in the range: a frame height of 2,850 mm against the taller catalogue frames, achieved at a lighter capacity. Height-constrained workshops are its market.
Does it lift as high as the big models?
Yes — 1,900 mm maximum lifting height, the same working height as the domestic family. The saving was taken in frame height and capacity, not in the lift under the car.
Send an inquiry
Ask for the unit matched to your work. Send the model code you are considering and the work it will do each week; ask for that model's specification sheet in return.
Request a quotation About the company