Inflatable booths
Inflatable paint booths: XP-614 to XP-618
Four inflatable booths share the range's working cabin — 6,900 × 3,900 mm inside, 2,700–2,800 mm high — in a structure that inflates for work and packs away after it, with fan sets from 16.5 to 17 kW total power.
Request a quotationBrowse the range- Cabin 6,900 × 3,900 mm
- Intake to 25,000 m³/h
- Power 16.5–17 kW
- Packs away after use
The same cabin, without the building work
The surprise in this family is that inflatable does not mean smaller: the internal cabin matches the panel booths' 6,900 × 3,900 mm footprint, with outside dimensions around 7,000 × 5,200–5,350 mm and heights to 3,600 mm depending on model. What changes is the structure — an inflated envelope held up by its air system, with the same personnel door arrangement (650 × 2,000 mm, handle and anti-explosion lock) across the family.
That makes the buying question honest: not 'how much painting can it hold' but 'how permanent is your site'. A workshop on a long lease with daily paint volume belongs in the panel booths. A business that cannot build, or paints in bursts, gets a real cabin here without a construction project.
Four fan sets
The models divide on air. The XP-614 pairs two 4 kW intake fans (25,000 m³/h) with a 7.5 kW exhaust (15,000 m³/h) at 16.5 kW total. The XP-615 runs one 7.5 kW fan each side at 18,000 m³/h both ways, 17 kW total. The XP-616 repeats the 614's intake pairing with a 7.5 kW exhaust at 18,000 m³/h. The XP-618 uses 7.5 kW turbo fans both sides at 25,000 m³/h each, 17 kW total, in the family's tallest cabin at 2,800 mm internal height.
The XP-614, XP-615 and XP-618 run three-phase 380V/220V at 50/60 Hz; for the XP-616, ask for the total power and supply figures in writing with your quotation. Choose by extraction need and cabin height: the figures above are the comparison, and your duct route — even an inflatable booth exhausts somewhere — is the site fact that finishes it.
Inflatable booth specification
The parameters below. All models: inside length 6,900 mm, width 3,900 mm; personnel door 650 × 2,000 mm with handle and anti-explosion lock. Three-phase supply is stated for the XP-614, XP-615 and XP-618; for the XP-616, ask for the supply figures in writing.
| Model | Inside height (mm) | Intake | Exhaust | Total power |
|---|---|---|---|---|
| XP-614 | 2,700 | 2 × 4 kW — 25,000 m³/h | 1 × 7.5 kW — 15,000 m³/h | 16.5 kW |
| XP-615 | 2,700 | 1 × 7.5 kW — 18,000 m³/h | 1 × 7.5 kW — 18,000 m³/h | 17 kW |
| XP-616 | 2,700 | 2 × 4 kW — 25,000 m³/h | 1 × 7.5 kW — 18,000 m³/h | Not stated |
| XP-618 | 2,800 | 1 × 7.5 kW turbo — 25,000 m³/h | 1 × 7.5 kW turbo — 25,000 m³/h | 17 kW |
Ask for the XP-616's total power and supply figures in writing with your quotation.
Checks before an inflatable-booth quote
- Ground or floor area for the inflated footprint, with ground fixing as the site requires.
- Power supply for 16.5–17 kW of fans, three-phase, at the working position.
- Where the exhaust air goes — the route exists even without a building.
- Paint volume honesty: bursts and overflow suit inflatables; daily production argues panel.
- Storage space and handling routine for the packed structure between uses.
Questions buyers ask about inflatable paint booth
How durable is an inflatable booth?
It is working equipment, not a tent: the envelope is the structure and it lives with fans running. Its life is decided by handling, storage and repair discipline — ask about the material and repair route for the exact model in your inquiry.
Can it be used indoors?
Yes, where the height takes the inflated structure and the exhaust route works; workshops use them inside large sheds exactly to avoid building a cabin. The checks above are the survey either way.
Which of the four should I pick?
By air first: balanced intake/exhaust (615, 618) against intake-led sets (614, 616), then by the 618's extra cabin height if your vehicles need it. Your duct route and paint volume finish the decision.
Send an inquiry
Ask for the unit matched to your work. Send the model code you are considering and the work it will do each week; ask for that model's specification sheet in return.
Request a quotation About the company